Skip to content
Old Westbury Wolf Appliance Repair Wolf Specialists · Old Westbury, NY Call

Guide

Gaggenau 400 Series Appliances: Reading the Rating Plate

How to confirm a Gaggenau 400 series appliance from its rating plate, read its age from the FD code, and give a technician the numbers parts depend on.

By Old Westbury Wolf Appliance Repair
A luxury kitchen with built-in stainless appliances on a same-day visit

Gaggenau’s 400 series is the brand’s upper built-in line: Vario modular cooktops, wall ovens, combi-steam ovens and Vario refrigerators designed to work as one matched suite. You confirm a unit belongs to it on the rating plate, where 400 series model numbers typically carry a 4 right after the letter prefix, as on the 36-inch VG491211CA Vario gas cooktop, whose three-ring wok burner runs from 1,000 – 18,800 BTU.

That plate is also what a technician asks for first.

What makes an appliance part of the Gaggenau 400 series?

Gaggenau is a premium built-in brand in the BSH (Bosch) group with two main lines. The 400 series is the fuller-featured one, with more cooking modes, more installation options and the modular Vario cooktop system; the 200 series covers the same appliance types more simply. Gaggenau’s US spec pages show the 400 series scale: the VG491211CA natural gas cooktop has a total rating of 59,700 BTU, and the 30-inch RC472705 Vario refrigerator offers 16.8 cu.ft. of net volume, a 40 dB (re 1 pW) noise level and settings from 35 °F to 46 °F.

Where is the rating plate on each Gaggenau appliance?

The rating plate is a printed label with the model number, a product number marked E-Nr, a production code marked FD, and the electrical or gas data.

  • Wall ovens and combi-steam ovens: open the door and check the edge of the oven frame or the door trim.
  • Vario cooktops: the plate is on the underside, inside the cabinet below. Many manual packets include a spare label or card with the same numbers, so check the paperwork first.
  • Refrigerators: inside the fresh-food compartment, usually on a side wall or low behind the bottom drawer.

Photograph the whole label; the print is small.

How do you read the model number and the FD code?

  1. Model number. Letters name the appliance type (VG on the Vario gas cooktop, RC on the Vario refrigerator), and on the 400 series examples above the first digit after them is a 4. As a rule of thumb, a 2 there points to the 200 series.
  2. E-Nr. The exact build, often the model number plus a slash and an index. Parts can change between builds, so give the full string.
  3. FD number. A four-digit production date code that a technician decodes to the year and month the unit was built, so you know its age even without paperwork.

Production date is not the warranty start. For appliances bought on or after January 1, 2025 in the U.S. or Canada, Gaggenau warrants against defects in materials and workmanship for five (5) years from the original delivery date, so keep the delivery receipt with the photo. Cosmetic damage such as scratches or dents is covered for only sixty (60) days.

Why does the technician need these numbers before the visit?

A 400 series repair is mostly a parts problem. With the model, E-Nr and FD, a technician can pull the right wiring diagram for that build, confirm the gas type (the VG491211CA is the natural gas version), bring the correct igniter, sensor or control board instead of diagnosing twice, and tell you whether the unit is likely still under warranty.

Gaggenau’s US warranty statement also says service by a repair shop not affiliated with Gaggenau, or third-party parts, does not void the warranty, although defects caused by that labor or those parts are excluded. Old Westbury Wolf Appliance Repair is an independent service, not manufacturer-authorized. Call (475) 264-6460 with your label photo ready, or see our Gaggenau service page.

In Old Westbury estate homes, where a full built-in suite often went in during one remodel, photograph every label at once.

Which problems are settings, not breakdowns?

These checks come from Gaggenau’s use and care manuals:

SymptomLikely causeWhat the owner can checkWhen to call a technician
Refrigerator display and lights work but it does not cool (RVB497790)Showroom mode is onSettings, Advanced, “Demo mode”: switch it off; the unit never cools in demo modeStill warm hours after demo mode is off
Water dispenses slowly (RVB497790)Filter due”Replace filter” message; change it every 6 monthsFlow stays low with a fresh filter
Steam modes locked (GS460720, GS461720)Descaling reminders skippedRun the 1 hour 50 minute descaling program with tablets (17002490, set of 4)Steam stays locked after a full descale
Vario gas burner won’t lightRing or cap out of place, wet igniterReseat and dry the rings and capsRepeated clicking with no flame

If you ever smell gas, leave the house and call your gas utility from outside.

What does a Gaggenau 400 series repair typically cost?

RepairTypical range
Diagnostic / service call$95–$149
Cooktop repair$200–$750
Range / oven repair$250–$900
Control board / electronics$400–$850

These are typical ranges; the firm quote is given on site after diagnosis. See repair pricing for the full list, or our steam oven page for combi-steam service.

Frequently asked questions

Is Gaggenau a luxury brand?

Yes. Gaggenau is a premium built-in brand within the BSH group, and the 400 series is the upper line of its cooktops, ovens and refrigeration.

What are the key differences between Gaggenau 200 series and 400 series ovens?

The 400 series offers more cooking functions and installation options, while the 200 series covers the same oven types more simply. The first digit after the letters in the model number tells you which you own.

Where can I find the Gaggenau 400 series manual?

Look it up on Gaggenau’s website using the model number or E-Nr from the rating plate.

How much does a Gaggenau cooktop repair cost?

Cooktop repair typically runs $200–$750, plus a $95–$149 diagnostic visit, with the firm quote given on site after diagnosis.

What repairs cost

Straight pricing, no surprises.

These are typical all-in market ranges for parts and labor on Wolf and premium built-ins across Old Westbury and Nassau County. Your exact price is quoted on site after diagnosis — the $95 service call is credited toward the repair.

RepairTypical range
Diagnostic / service call$95–$149
Range / oven repair$250–$900
Cooktop repair$200–$750
Gas valve / spark module$300–$650

Ranges are estimates for reference, not a quote. Genuine OEM parts · 1-Year Parts & Labor Warranty.

4.9★ · Old Westbury & Nassau County

Need Expert Appliance Repair?

Call (475) 264-6460 for same-day service in Old Westbury.

Call Now: (475) 264-6460